Table of Contents
Advertisement
2.4
Reset/Reboot button
R
AX145
Reset/Reboot button
The Reset/Reboot button, located at the front panel, has two (2) functions:
Reset to factory default settings
•
To reset the device to its factory default settings, press the Reset /Reboot
button at least five (5) seconds using a sharp pointed object such as a pen.
System reboot
•
To reboot the device, short press and quickly release the Reset/Reboot button using a
sharp pointed object such as a pen.
2.5
LAN IP Assignment
By default, the AX-125/145 LAN IP address is set to 192.168.1.1 with subnet mask
255.255.255.0. You can change the LAN IP address for AX-125/145 via the WEB
GUI or the Interactive Voice Response (IVR).
Assigning LAN IP via IVR
To assign LAN IP via IVR
1. On the phone1, dial "****" to enter the IVR main menu.
2. Enter the commands to check or set the LAN IP. Refer to Table 1 for the
command codes.
NOTE: You can only assign LAN IP via IVR on Phone1.
4
4
3
2
1
AX-125/145 SIP VoIP Router Quick Installation Guide
3
2
1
7
Advertisement
Table of Contents
