Table of Contents
Advertisement
3.2
Configuration options
The AX-125/145's GUI enables you to configure the following:
WAN: Enables you to configure the Internet
•
connection mode (DHCP, Static IP, or PPPoE),
and the DDNS services.
L A N : E n a b l e s y o u t o d e f i n e t h e L A N I P
•
(Gateway IP and netmask), and disable/enable
the DHCP service.
VoIP: Enables you to configure the Session
•
Initiation Protocol (SIP) settings such as SIP
contact port, NAT traversal; configure the SIP
server information; assign call function and
set up phone book settings; configure the
codec settings for your VoIP call function; and
configure other miscellaneous settings for your
VoIP call function.
Firewall: Allows you to enable/disable the basic
•
firewall functions such as DOS attack filtering,
port scan detection, and ICMP echo reply.
NAT: Allows you to configure the Network
•
Address Translation (NAT) function settings
such as IP share, DMZ host, port redirect, and port trigger.
Traffic Control: Enables you to configure the allowable upload/download
•
bandwidth during an active VoIP call. The AX-125/145 has two Quality of
Service (QoS) modes: Policy mode, and Custom rule mode.
Management: Enables you to configure administrative settings such as
•
enabling/disabling web access allowed from WAN side; GUI authentication to
prevent unauthorized login; upgrading the AX-125/145's firmware; restoring the
AX-125/145's system to factory default settings; restoring or keeping backup of
the AX-125/145 system's configuration; and keeping records of log events.
AX-125/145 SIP VoIP Router Quick Installation Guide
11
Advertisement
Table of Contents
