Yamaha YAS-203 Owner's Manual page 22

Problem Cause
Cannot make the is not selected as the
input source.
sound bar paired
with the
The device does not support
A2DP.
device.
A
want to pair with the sound bar
has a password other than
"0000."
The sound bar and device are too
far apart.
There is a device (microwave
oven, wireless LAN, etc.) that
outputs signals in the 2.4 GHz
frequency band nearby.
Another
connected.
Cannot make a Another
connected.
connection.
More than nine devices are paired
and the oldest pairing information
is deleted.
18
Remedy
Select as the input source.
Perform pairing operations with a
device which supports A2DP.
adaptor, etc., that you Use a adaptor, etc., whose
password is "0000."
Move the device closer to the sound
bar.
Move the sound bar away from the
device that is emitting radio frequency
signals.
device is Terminate current
connection, and perform pairing with
the new device.
device is The sound bar cannot make multiple
connections. Terminate
current connection, and
make connection for the desired
device.
Perform pairing again. The sound bar
can retain pairing information for up to
eight devices. When pairing a ninth
device, the oldest pairing information
will be deleted.
No sound is The connection of the
sound bar with the device is
produced or the
disconnected.
sound is
interrupted
is not selected as the
during playback.
input source.
The sound bar and device are too
far apart.
There is a device (microwave
oven, wireless LAN, etc.) that
outputs signals in the 2.4 GHz
frequency band nearby.
The device is not set to send
audio signals to the
sound bar.
Playback on the device has not
been performed.
The device's volume is set to
minimum.
Perform connection
operations again (p.10).
Select as the input source.
Move the device closer to the sound
bar.
Move the sound bar and subwoofer
away from the device that is emitting
radio frequency signals.
Change the audio output setting and
connection setting on the device.
Perform playback on the device.
Turn up the volume level.