Yamaha YAS-203 Owner's Manual page 13

(power) key
Turns on or off (standby) the sound bar.
The STATUS indicator on the sound bar
Green (turned on)
Red ( standby) (p.11)
Off (turned off)
The STATUS indicator on the subwoofer
Green (turned on)
Red (turned off)
★
BLUETOOTH STANDBY key
Enables/disables the standby mode
(p.11).
★
SUBWOOFER PAIRING key
Performs pairing between the sound bar and
subwoofer (p.19).
SURROUND and STEREO keys
Switch between surround and stereo
(2 channel) playback. When surround playback is
selected, you can enjoy a realistic sound effect
using Yamaha's exclusive AIR SURROUND
XTREME.
SURROUND Lights up (surround playback)
STEREO Off (stereo playback)
HINT
• When 2 channel stereo signals are played in surround,
the PLII indicator lights up.
Lights up (Dolby Pro Logic II)
4
CLEAR VOICE key
Enables/disables the clear voice function.
When this function is enabled, you can enjoy clear
voice sounds while watching movies, TV dramas,
news programs or sports programs.
Flash 3 times (enabled), flash once (disabled)
UNIVOLUME key
Enables/disables the UniVolume function.
When this function is enabled, consistent volume is
maintained when inputs or sound sources switch.
Flash 3 times (enabled), flash once (disabled)
HINT
• The UniVolume function is automatically disabled when
BLUETOOTH is selected as the input source.
AUDIO DELAY key
Adjusts the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio delay.
5
1 Hold down the AUDIO DELAY key for more
than 3 seconds.
The left most indicator flashes.
2 Press the SUBWOOFER (+/–) key to adjust
the audio delay.
Pressing the SUBWOOFER (+) key delays the
audio output timing.
(–)
3 To finish the adjustment, press the AUDIO
DELAY key.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
BASS EXTENSION key
Enables/disables the bass extension function.
When this function is enabled, you can enjoy
powerful sound during surround playback through
Yamaha's exclusive bass boost technology.
MUTE key
Mutes the audio output. Press the key again
to unmute.
★
Decoder indication
The sound bar supports the following audio signals. You
can check the type of the input audio signal by the color
of the indicator.
(+)
Flash 3 times (enabled), flash once (disabled)
Flash (on mute)
Green (Dolby Digital), Red (DTS Digital Surround)
Off (PCM)
6
7
9