Introduction - Biketronics BT4180.14 Installation Manual

Congratulations on your purchase! The BT4180 is a state-of-the-art amplifier
designed specifically for motorcycles and built by American hands. Should
you have questions regarding your amplifier, feel free to call Biketronics Inc.
at 1-800-735-2419 and our lifetime support team will help you out.
• Read all instructions FIRST. It will make installation easier and eliminate
potential problems.
• Disconnect battery cables from Harley
this now! Failure to do so is an improper installation and will cause a short
to ground and is NOT covered under warranty!
• Our amplifiers pack a lot of power so please operate with good judgement
to protect hearing and respect the noise oridinance of where you ride.
• Go easy. Don't force parts.
• Prior to disassembly, ensure that you have all necessary tools and parts for
the job.
• Protect bike finish using towels and blankets. Before fairing removal, prepare
a safe padded area to store fairing.
• Allow plenty of time – don't rush the job. Allocate 1-2 hours for completion.

Introduction

PLEASE READ
NEED HELP?
Visit www.biketronics.com/support
or give us a call at 1-800-735-2419
battery – negative cable first. Do
®
5