Step 7: Power Connection; Step 8: Test Amplifier; Troubleshooting - Biketronics BT4180.14 Installation Manual

Step 7
• Run supply lead wire to the battery.
Step 8
• Reconnect battery (positive cable first)
• Check amplifier function:
• Power up radio and turn volume down as quick as possible so you can start
at low volume and slowly work up.
• Add volume and make sure all speakers have good sound.
• Check to make sure everything is installed correctly.
• Reinstall fairing and go riding!
It is unsafe to look down at radio while riding. Familiarize yourself with radio
controls in garage. Allow yourself time to normalize working the unit with
hand controls and "hearing" the result. Please exercise proper riding safety!
It's also worth noting that our gear is designed to be loud. Please use caution
when turning the volume up so you don't damage your hearing.
• Ensure proper connections have been made.
• Check that radio appears to be operational and display is active.
• Check status LED: orange = power applied, green = amp enabled.
Power Connection
Test Amplifier
SAFETY NOTICE

Troubleshooting

13