Country Specific Power Cord - Fujitsu PRIMERGY TX150 S8 System Configurator And Order-Information Manual

C
S26113-F575-E10
2x Power supply 450W
(hot plug)
occupies one bay for
hot plug power supply
max. 2x per system
For later upgrades the following kits are available:
1 power supply module 450W hot plug:
Supplementary module
Attention: There is no power cable included!
Std to Redundant Upgrade Kit
consisting of a redundant PSU cage and backplane
AND a 4th fan for fan redundancy
Does not contain any PSU module
II
Section Processor
There is1 processor socket available.
Max.1 CPU can be selected per basic unit
One of following CPU´s has to be selected
for an orderable basic unit
Basic 4C Pentium
- 1x 64-bit Intel Pentium (5MB shared TLC = Third Level Cache )
1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink
occupies CPU socket
Pentium 1403 2C/2T 2.60GHz 5MB 6.40GT/s 1066MHz 80W
Basic 4C Single Socket Xeon
- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )
1333 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink
occupies CPU socket
Xeon E5-1410 4C/8T 2.80GHz 10MB 6.40GT/s 1333MHz 80W
Basic 4C CPU's
- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )
1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink
occupies CPU socket
Xeon E5-2403 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W
Xeon E5-2407 4C/4T 2.20GHz 10MB 6.40GT/s 1066MHz 80W
Standard Turbo 6C CPU's
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies CPU socket
Xeon E5-2420 6C/12T 1.90GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2430 6C/12T 2.20GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2440 6C/12T 2.40GHz 15MB 7.20GT/s 1333MHz 95W
Advanced Turbo+ 8C CPU
- 1x 64-bit Intel Xeon (20MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1600 MHz DDR3 Bus, 8,00 GT/s QPI Bus and passive heat sink
occupies CPU socket
Xeon E5-2450 8C/16T 2.10GHz 20MB 8.00GT/s 1600MHz 95W
Low Power 6C CPU
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies CPU socket
Xeon E5-2430L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W
D
1x mandatory for redundant base units
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX150 S8
For redundant Base Units only
(V201, V401, V601 and V801)
For redundant floorstand versions only
(V201 and V401)
A second, redundant power supply requires an additional
country specific power cord (section XIII)
S26113-F575-L10
S26361-F3699-L1
Note: Max. DDR3 Bus Speed depends on:
S26361-F3726-E260
S26361-F3751-E280
S26361-F3684-E180
S26361-F3684-E220
S26361-F3723-E190
S26361-F3723-E220
S26361-F3723-E240
S26361-F3724-E210
S26361-F3725-E200
Status 2016-02-29
- max. DDR3 Bus Speed from the CPU and
- max. DDR3 Memory Speed and
- max. memory modules on one memory channel
8 of 24