Electrolux EN8000W Instruction Manual page 19

earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
9.3 Location
It must be possible to
disconnect the appliance
from the mains power supply;
the plug must therefore be
easily accessible after
installation.
The appliance should be installed well
away from sources of heat such as
radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around
the back of the cabinet. To ensure best
performance, if the appliance is positioned
below an overhanging wall unit, the
minimum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below
overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet
at the base of the cabinet.
A
B
CAUTION!
In order to guarantee proper
functioning in ambient
temperature above 38°C, it is
advised to have a 30mm
separation between the sides
of the appliance and
surrounding furniture.
9.4 Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
9.5 Installation of the
TASTEGUARD filter
The TASTEGUARD filter is an active
carbon filter which absorbs bad odors and
permits to maintain the best flavour and
aroma for all foodstuffs without risk of
odor cross contamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
CAUTION!
Make sure that the air lever
drawer is closed to obtain
proper function. Handle the
filter carefully so fragments do
not loosen from the surface.
1. Open the drawer.
2. Remove the filter from the plastic bag.
3. Insert the filter in he drawer.
4. Close the drawer.
ENGLISH 19