Removing And Attaching The Carrying Handle - Panasonic PT-L557U Operating Instructions Manual

Removing and Attaching the Carrying Handle

The LCD Projector Carrying Handle can be removed and attached. When the Projector is set up SO that it need not
be moved, you can decrease the convave-convex of the Projector by removing the handle.
Please follow the instructions below to remove and attach the carrying handle.
When Removing the Carrying Handle
Note:
Remove the handle while in the raised position,
Removal is difficult if in the lowered position.
1 Hold in the two lock buttons, located on the Lock Ring at the
base of the handle as shown.
2 Turn the Lock Ring to the left so that the
RELEASE on the LCD Projector.
3 Repeat steps 1 and 2 and remove the other Lock Ring..
4
Slowly pull the carrying handle straight out from the LCD
Projector.
Caution:
Pull the
right and left sides of the carrying handle out equally. If
you pull
it out forcelly, the joining part of the LCD Projector and
carrying handle may be damaged.
When Attaching the Carrying Handle
1 Insert the carrying handle into the LCD Projector so that the
mark on the Lock Ring is aligned with RELEASE on the LCD
Projector.
2 Hold in the two lock buttons, located on the Lock Ring at the
base of the handle as shown.
3 Turn the Lock Ring to the right so the
on the LCD Projector and you hear it click into the locked
position. (The Lock Ring is locked.)
Note:
Attach the carrying handle securely. If you carry the LCD Projector
with the carrying handle improperly attached, the handle could
come off and damage may result.
4 Repeat steps 1 and 2 and remove the other Lock Ring.
Carrying Handle
mark points to
mark points to LOCK
42
Lock Ring