Setting Calendar And Time; Advanced Settings - Honeywell TB7220U Installation Instructions Manual

SETTING CALENDAR AND TIME

This thermostat is designed to, under normal use,
automatically keep current time and day in memory for up
to ten years once the calendar is set. There are two ways
to set the calendar and time for this thermostat:
SETTING DATE/TIME WHEN THERMOSTAT IS FIRST POWERED
When the thermostat is first powered, the display is ready
to set the calendar and time. The thermostat proceeds
through a sequence of setup screens. See Fig. 24.
YEAR
MONTH
Tue
DeSelect Day
System & Fan
GO BACK KEY
GOES BACK TO
LAST SETTING
NEXT KEY
ADVANCE TO NEXT SETTING
Fig. 24. Setting calendar and time when thermostat is first powered.
SETUP
NUMBER
Go Back Next
GOES BACK ADVANCE TO
NEXT SETUP
TO LAST
SETUP NUMBER
NUMBER
Setup Setup
Number Name
0120 Date (Year
Upper)
0130 Date (Year
Lower)
0140
Date
(Month)
0150 Date
(Day)
Fig. 25. Setting Date/Time after thermostat is already
functioning.
UP AND DOWN KEYS
DAY
CHANGES MONTH, DAY,
YEAR AND TIME
FanUseEdit View
Schedule Clock & More
DONE KEY
ADVANCES TO TIME SETTING
SCREEN AND HOME SCREEN
AM
View
Clock & More
Done
PRESS TO
EXIT SETUP
(Select Your Setting)
Settings
Select first two digits of current
calendar year (20 for year 2005, etc).
Select last two digits of current
calendar year (05 for year 2005, etc).
Select number that represents current
calendar month.
Select number that represents current
calendar date.
TB7220U ULTRASTAT PROGRAMMABLE THERMOSTAT
SETTING DATE/TIME AFTER THERMOSTAT IS ALREADY
FUNCTIONING
Use the installer setup to set year, month and day. See
Fig. 25.

ADVANCED SETTINGS

The thermostat has advanced settings to match the HVAC
FACTORY
SETTING
system. These settings can be adjusted to match specific
needs. See the following section (Installer Setup
CHANGE
Numbers, Settings, and Tests) for details.
THE
FACTORY
SETTING
M23049
9
PM
Done
M23023
62-0223—1