Turning Off The Power; Shut Down Mode; Suspend Mode - Toshiba AC100 User Manual

Device options menu
The device provides you with an option menu where you can quickly
change the mode of your device:
To open the Device options menu, press the power button for about two
seconds. The menu will be displayed with the following options: Silent
mode, Airplane mode, Power off and Suspend.

Turning off the power

The power can be turned off in one of two modes, either Shut Down Mode
or Suspend Mode. You can also turn the LCD off in order to extend the
battery life.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and
the device will boot to the operating system's main screen the next time it is
turned on.
1. If you have entered data, either save it to flash memory or to other
■
■
■
2. Turn off any peripheral devices connected to the TOSHIBA AC100
Do not turn the device or peripheral devices back on immediately - wait a
short period to avoid any potential damage.

Suspend Mode

If you have to interrupt your work, you can turn off the power without exiting
from your software by placing the device into Suspend Mode.
■
■
Downloaded from LpManual.com Manuals
User's Manual
storage media.
■
Select Power off from the Device options menu.
Never turn off the power while an application is running. Doing so could
cause loss of data.
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.
In any emergency case, you can also press the power button for about
six seconds to force power off.
device.
Before entering Suspend Mode, be sure to save your data.
Do not remove the battery pack while the device is in Suspend Mode
unless the device is connected to an AC power source. Data in
memory could be lost.
Getting Started & Grand Tour
1-6