Toshiba AC100 User Manual page 91

■
■
USB device
The TOSHIBA AC100 device is equipped with a USB port that can
accommodate the following USB devices: USB flash memory, External
USB HDD, HID (Keyboard and Mouse) and USB hub. This port complies
with USB 2.0 standard.
To connect a device, plug the device's connector into the USB port on your
device.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
As the port operation of all USB devices has not been confirmed, some
USB devices may not function properly.
1. USB port
■
■
■
Downloaded from LpManual.com Manuals
User's Manual
Do not remove the memory media while the device is in Suspend
mode. The device could become unstable or data in the memory media
could be lost.
Do not remove only the miniSD/microSD Card while leaving the
adaptor in the Bridge Media slot.
Figure 6-8 Connecting a USB device
This device does not support a printer connected to the USB port.
This device only support external USB HDD (FAT only) and USB Flash
Memory (FAT only) for data copy.
If the USB device you connected is not supported by this device, a pop-
up notification will be shown.
Hardware & Options Operation
1
2. USB connector
2
6-14