Temperature - Bosch tca60f9 Repair Instruction

5.6

Temperature

5.6.1 Temperature pattern
The temperature graph indicates the temperature pattern on the
heater during operation.
I Heating up
II Brewing mode
III Draw coffee (approx. 91 °C) / draw hot water (approx. 95 °C)
IV Reheating
V Brewing mode
VI Heating up to draw steam (approx. 140 °C)
VII Steam ready
VIII Drawing steam
IX Cooling after drawing steam
58300000111195_ARA_en_f.doc – 02.06.09
For Basic-variants TK60x /TCA60x the temperature
level cannot be adjusted.
Temperature setting is fixed by the factory.
A Switch on, press Standby button
B Press the coffee dispensing button or draw hot water
C Stop drawing coffee / hot water
D Turn function selector to steam, heating up process begins
E Draw steam
F Turn function selector to cafe, cooling down process begins
!
After coffee has been drawn,
the appliance may be briefly
disabled from reheating.
As soon as steam has been
drawn, coffee can be brewed
again without waiting for the
appliance to cool down.
Coffee cannot be drawn after
steam has been drawn if there
is too little ground coffee in the
brewing unit. The brewing
process is terminated, there is
no pumping. The brewing unit
moves to the grinding position.
Automatic cooling starts (several
ml of water are conveyed).
Seite 47 von 102