Warranty - CST/BERGER SAL20N Instruction Manual

WARRANTY

Five Year Warranty. Robert Bosch Tool Corporation warrants this instrument against defects in
material and workmanship for a period of five years from the date of purchase. Deficient products
will be repaired or replaced at CST/berger's discretion. For warranty and repair information,
contact you local distributor.
For U.S., before returning the instrument to CST/berger, please call
(815) 432-9200 for a Return Authorization Number from our Customer
Service Department.
CST/berger's liability under this warranty is limited to repair or replacement of the unit. Any
attempt to repair the product by other thanfactory authorized personnel will void this warranty.
Calibration and maintenance are the responsibility of the user. Where permitted by law, CST/berger
is not responsible for incidental or consequential damages.
Agents of CST/berger cannot change this warranty. CST/berger is not responsible for damage
resulting from wear, abuse, or alteration of this product. The user is expected to follow ALL
operating instructions.
This warranty may provide you with additional rights that vary by state, province or nation.
IMPORTANT NOTE: The customer is responsible for the correct use and care of the instrument.
Moreover he is completely responsible for checking the job along its prosecution, and therefore for
the calibration of the instrument. Calibration and care are not covered by warranty.
Subject to change without notice
PAL/SALN AutoLevel • 7