Technical Information - JVC LT-42R10BU Instructions Manual

Technical information

What is "ACI" (Automatic Channel Installation)?
Some cable companies transmit a signal called "ACI" which contains
information that allows TV channels to be registered automatically on your
TV.
When an ACI signal is received, "ACI Start / ACI Skip" appears in the "Auto
Program" screen.
Receivable broadcast systems
Depending on the country selected during "Auto Program", the receivable
broadcast system differs.
UNITED KINGDOM: Receive only PAL-I.
FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the "Country" to "France" in "Auto Program". (P. 28)
2) Press the "BACK" button to return to the menu and enter the channel
using "Insert" or "Manual". (P. 14, 15)
Auto in "Zoom"
When "Auto" is selected in Zoom, the aspect ratio will turn to the ratio
obtained from the information the TV received.
The aspect ratio will turn to the ratio obtained from WSS (Wide Screen
Identification Signal), video signal, or control signal of the external devices.
Without receiving the aspect information, it will be the setting in "4:3 Auto
Aspect". (P. 25)
What is "Eco Sensor"?
You can adjust this TV so that the screen automatically adjusts to the
optimum contrast of light and dark according to the brightness of your room.
This function reduces eyestrain and the power consumption of this TV.
Set "Eco Sensor" "Eco Sensor" (P. 27)
g
Make sure not to block the Eco Sensor on front of the TV (P. 6)
To fully reduce eyestrain and the power consumption of this TV. Set to the
following functions.
Eco Sensor: On or Demo (P. 27)
Smart Picture: On (P. 25)
Using "Demo" in "Eco Sensor", you can display the effect of the "Eco
Sensor" on the screen
Eco Sensor
Dark
What is "Full Native"?
With the full HD LCD display and "Full Native", you can enjoy full native HD
resolution of 1920 x 1080. It exposes flaws in the video that were hidden
when viewing on "Full".
Full
* The illustrations are emphasised to make clear differences between "Full"
and "Full Native".
Dark bar or noise may appear at the edges of the screen when viewing in
"Full Native" for some videos. This is resulted from the signal itself, not due
to TV malfunction.
Light
Full Native
32