JVC LT-42R10BU Instructions Manual page 33

Problem
Adjust "Bass" and "Treble". (P. 26)
If receiving a poor signal in "Stereo/t-u",
Poor sound switch to "v" (monaural). (P. 21)
Change the broadcasting system using
"Manual". (P. 15)
Audio signals received from EXT-4, EXT-5
No sound from the
and EXT-6 cannot be sent to the
audio component
AUDIO OUT terminal.
If you hear both the left and right sound from
Left and right sound
one side of the speaker even after adjusting
coming from one side the speaker balance to one side, set
"Hyper Sound" and "3D Cinema Sound" to
of the speaker
"Off". (P. 20, 26)
It is not a malfunction. Depending on the
Some functions do
situation, some function items will be
displayed in black colour and will not work.
not work
(P. 24)
Read the user manual of the connected
device and perform the following:
Check if the output setting of the device is
g
Wrong screen size
correct.
Change the signal format of the device to
g
other format.
Use the cable marked with HDMI logo.
No picture, no sound
Check if the device is compliant with HDMI.
Set "HDMI-1 Audio Setting" to "Digital" or
No sound "Auto" for HDMI devices, or "Analogue" or
"Auto" for DVI devices.
(Not available for EXT-5 and EXT-6.) (P. 28)
ENGLISH
Actions Problem
Wait a little for the signal to stabilize when
Green and distorted
switching the signal format for an HDMI
screen
device.
Press
"ACI Error" appears If you still receive the "ACI Error" after
numerous tries, press
Actions
to start "ACI" again.
to cancel "ACI".
31