Getting Started - JVC LT-42R10BU Instructions Manual

Getting started

Please read P. 9 - 15 of this manual to set up your TV.
Check accessories
Remote control
RM-C1932
Cleaning cloth
(For details on using the
cleaning cloth, see P. 7.)
Stand and screws are also included. For details, refer to page 7.
(LT-32R10BU only)
Install your TV
Power requirements
Connect the power cord only to a 220 - 240 V, 50 Hz AC outlet.
When attaching the TV to the wall, use the optional JVC wall mounting unit
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to improper mounting.
Mounting holes for wall mounting unit:
LT-32R10BU:
M5 x 4, 200 mm x 200 mm
Depth of screw hole is 7 mm from the surface of the TV.
LT-42R10BU:
M5 x 4, 400 mm x 200 mm
Depth of screw hole is 13 mm from the surface of the TV.
"AAA/R03" Batteries
(For confirming the TV
works)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Installation requirements
Place the TV on a flat and stable location.
To avoid overheating, ensure the unit has ample room.
150 mm 50 mm
Insert the batteries
Use two "AAA/R03" dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.
200 mm
150 mm 50 mm
8