Cascading Inputs - Crown DCi 8 600DA Operation Manual

Setup and System Configuration

Cascading Inputs

Cascading the analog inputs, or "Y-ing channels", gives more flexibility to the installation of a DCi DA amplifier (See Figure 17). One input can be used to drive some or
all of the amplifier outputs.
NOTE: By cascading the inputs, the corresponding input DSP functions for individual channels will be removed and only the output DSP functions will be available (See
Figure 18).
Figure 17: Use the "Y" checkboxes to cascade input channels
Figure 18: With the "Y 1+2" box checked, both output Ch.1 and Ch.2 are fed by input Ch.1 and input processing is organized accordingly
page 16 DriveCore Install DA Series Operation Manual