Installation - TDC Netopia User Manual

1. Installation

On the following pages, you can read how to install your ADSL router, depending
on the telephone socket and the type of connection you have.
If you have converted your connection from a landline connection/basic line
to ISDN or vice versa from TDC, you need to remove all equipment up to the
telephone/network socket and follow the directions given here.
If you have previously had a modem installed, this is no longer going to be
used, and you may discard it. If you are unsure about what it looks like, the TDC
modem is typically called SpeedStream (type 4100 or 5100) or Siemens, and it
could look like this:
pwr
Ethernet
dsl
Remove the cable from the modem's DSL/ADSL port and connect it to the
router's DSL port. The splitter is now the only equipment that should remain
between the ADSL router and the wall network socket.
5