Colour System Selection (Different Region Use Differing Systems) - Panasonic TX-47P500H Operating Instructions Manual

Colour System Selection
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.
1
2
Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries.
NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL
television equipment.
3
STR
TV/AV
(Different region use differing systems)
Press to select the "COLOUR SYS".
Press to produce the optimum image.
The colour system will change as shown.
AUTO PAL
NTSC3.58
Press to store the Colour System.
Press to exit from the "COLOUR SYS".
This returns the set to the normal viewing condition.
SECAM
NTSC4.43
Tuning Channels
TUNING MENU
CH SELECT POSITION
SYS SELECT JAPAN
AUTO TUNE
MANUAL TUNE
SOUND SYS 6. 0MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
Colour System Condition.
TUNING MENU
CH SELECT POSITION
JAPAN
SYS SELECT
AUTO TUNE
MANUAL TUNE
SOUND SYS 6. 0MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
21