Tuning Channels
Sound System Selection
This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme
Number, and is not applicable in AV mode .
1
Note:
These are different sound broadcast transmission systems applicable to differing countries.
2
STR
TV/AV
Colour System Selection
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.
1
Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries.
NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL
television equipment.
2
STR
TV/AV
24
(Different region use differing systems)
Press to select the "SOUND SYS".
Press until the optimum sound is obtained.
The sound system will change as shown.
4.5MHz
6.5MHz
Press to store the Sound System.
Press to exit from the "SOUND SYS".
This returns the set to the normal viewing condition.
(Different region use differing systems)
Press to select the "COLOUR SYS".
Press to produce the optimum image.
The colour system will change as shown.
AUTO
PAL
NTSC3.58
Press to store the Colour System.
Press to exit from the "COLOUR SYS".
This returns the set to the normal viewing condition.
5.5MHz
6.0MHz
SECAM
NTSC4.43
TUNING MENU
SYS SELECT
AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS
5. 5 MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP
OFF
Sound System Condition.
TUNING MENU
SYS SELECT
AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS
5. 5 MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP
OFF
Colour System Condition.