Access Network Camera Over Lan; Network Connection; Access The Camera; Jnvr - Jovision IPC Quick Start Manual

3

Access Network Camera over LAN

3.1 Network Connection

To view and configure the camera via a LAN, you need to connect the network camera in the
same subnet with your computer, as shown above, and install the CloudSEE or JNVR software to
search and access the network camera.
Note:
If you have a NVR in your LAN, you can connect the camera on NVR, please refer to NVR user's
manual for detailed information.

3.2 Access the camera

JNVR is a software tool which can access and manage network camera in a LAN.
Note:
JNVR Default Username : abc Password: 123
Install and run JNVR, the
main view is as shown on
the right.
JNVR will search and
connect network camera
automatically if there is
no device added.
Click Devices at the

JNVR

bottom, the Devices
Management dialog box
appears. Device
information including
device name, CloudSEE
ID, IP address, Channel
status are listed.
Jovision Network Camera Quick Start Guide
Add selected Device
Add All Detected Devices
Research Device
Delete All Added Device
Delete All Added Device
Set IP for Camera
Automatically
6