Safety Instruction; Warnings; Cautions - Jovision IPC Quick Start Manual

6

Safety Instruction

6.1 Warnings


Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard.

If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)

To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.

This installation should be made by a qualified service person and should conform to all the
local codes.

Please install blackouts equipment into the power supply circuit for convenient supply
interruption.

6.2 Cautions


Make sure the power supply voltage is proper before using the camera.

Do not drop the camera or subject it to physical shock.

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time,
put on the lens cap to protect the sensor from dirt.

Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong
light can cause fatal damage to the camera.

The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor not be exposed to it.

Do not place the camera in extremely hot, cold temperatures (the operating temperature
should be between -30°C to 60°C), dusty or damp environment, and do not expose it to high
electromagnetic radiation.

To avoid heat accumulation, good ventilation is required.

Keep the camera away from water and any liquid.

While shipping, the camera should be packed in its original packing.
Jovision Network Camera Quick Start Guide
13