Option Menu; Input Guide; Startup Logo; Function Button - Panasonic PT-LB51SU Operating Instructions Manual

OPTION menu

Remote control
See "Navigating through the MENU" on page 27.
See "Main menu and Sub-menu" on page 28.

INPUT GUIDE

When the input signal is changed, the input signal
information will be displayed in the upper right corner of
the projected images. You can select the level of the
input signal information.
Options
The input signal information will not
OFF
be displayed.
Only the name of the input signal will
SIMPLE
be displayed.
The input signal information will be
DETAILED
displayed in detail.
NOTE:
• If "INPUT GUIDE" is set to "DETAILED", the guide
screen for computer connection will be displayed when
COMPUTER1 or COMPUTER2 is selected and no
signal is being input to the COMPUTER1 IN or
COMPUTER2 IN connector. If you would like the guide
screen not to be displayed, set "INPUT GUIDE" to
"SIMPLE" or "OFF".

STARTUP LOGO

You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option.
ON
OFF
E
NGLISH - 34
Control panel
Function
Active
Deactive

FUNCTION BUTTON

You can assign frequently-used operations to the
FUNCTION button on the projector and use it as a
convenient shortcut button. The functions which can be
set are "SHUTTER", "AUTO SETUP", "PICTURE
MODE", "FREEZE" and "INDEX WINDOW".
Use I H to select the function to assign to the
FUNCTION button.
SHUTTER
INDEX WINDOW
FREEZE
Operates the shutter function
SHUTTER
See "SHUTTER" on page 36
Starts the automatic position
correction function
AUTO SETUP
See "AUTO SETUP" on
page 35
Switches the picture mode
See "PICTURE MODE" on
PICTURE MODE
page 30.
Operates the freeze function
See "Capturing an image" on
FREEZE
page 24
Operates the INDEX-
WINDOW function
INDEX WINDOW
See "INDEX-WINDOW" on
page 36

COMPUTER2 SELECT

You can switch the function of the COMPUTER2 IN/
1 OUT terminal.
INPUT COMPUTER2 IN
OUTPUT COMPUTER1 OUT

LAMP POWER

This setting changes the lamp brightness. When set to
"ECO-MODE", the luminance of the lamp is reduced, but
the projector uses less power, and the operating noise is
also reduced. This can help to extend the lamp's
operating life. If using the projector in small rooms where
high luminance is not required, it is recommended that
you set the "LAMP POWER" to "ECO-MODE".
Normal mode
STANDARD
ECO mode
ECO-MODE
NOTE:
• "LAMP POWER" cannot be set when no signal is being
input.
AUTO SETUP
PICTURE MODE