Table of Contents
Advertisement
4.7 Termination
The termination of the Main-Channel has been set to OFF by default. If the ProfiHub is the last/first
device on the segment, the termination should be set to ON (
The termination of the Channels have been set to ON by default. Because it is assumed that the new
segment is started at the ProfiHub (
Termination of the Main
Channel (Default set to
OFF)
Fig. 13 - Termination Switches
Don't forget to switch the termination ON at the other end of the segment and make sure it is
powered continuously.
ProfiHub-A5B5-Manual-EN
).
Fig. 13
Termination of the
Channel
Channel
Channel
Channel
Channels (Default set
Connectors
Connectors
Connectors
Connectors
_______________________________________________
Version 2.1.1 – June 2014
).
Fig. 13
to ON)
© PROCENTEC 2005-2014 - Copyright - all rights reserved
ProfiHub A5/B5 User Manual
Page 30 / 59
Advertisement
Table of Contents
