Adjusting Colour Matching - Panasonic PT-D7700E Operating Instructions Manual
Dlp based projector commercial use
Hide thumbs
Also See for PT-D7700E:
- Service manual (132 pages) ,
- Operating instructions manual (106 pages) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
Option settings
Adjusting colour matching
When multiple sets are used simultaneously, this projector allows the user to correct the difference of colours
among the sets.
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
OPTION
PROJECTOR ID
SETTING
LAMP SELECT
LAMP POWER
RS232C SETTING
OSD POSITION
SYSTEM INFORMATION
COLOR MATCHING
VIDEO SETTING
AUTO SETUP
:MENU SELECT
ENTER:SUB MENU
COLOR MATCHING:3COLORS
R
G
B
AUTO TESTPATTERN
3COLORS:R
R
G
B
:MENU SELECT
:ADJUST
Note
Adjustment
• The effects of correcting the adjustment colour
When tuning the correction colour that is the same as the adjustment colour: the brightness of the adjustment
colour changes.
When tuning the correction colour RED: RED is added to or reduced from the adjustment colour.
When tuning the correction colour GREEN: GREEN is added to or reduced from the adjustment colour.
When tuning the correction colour BLUE: BLUE is added to or reduced from the adjustment colour.
• This adjustment should be carried out by a person who is familiar with the projector or by a service person
because a high level of skill is required to make successful adjustment.
• Pressing the "STD" (standard) button will restore the factory defaults for all items.
• When any setting other than "OFF" has been selected for colour matching, the COLOUR TEMP. setting is fixed
at "USER1"
68
2
FRONT-F
DUAL
HIGH
2
3COLORS
:CHANGE
OFF
2048
0
0
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press "ENTER" button.
The OPTION screen will be displayed.
Select "COLOR MATCHING" with the
buttons.
Select "3COLORS" with the
buttons.
Press the "ENTER" button.
Select "R", "G" and "B" with the
buttons.
Press "ENTER" button.
Adjust the values with the
buttons.
These values can be adjusted from 0 to 2048.
Note
• When "7COLORS" is selected in step
it is possible to adjust the 7colours of "R",
"G", "B", "Cy", "Mg", "Ye" and "Wh".
,
Advertisement
Table of Contents
