How To Change The System Format - Panasonic PT-D7700E Operating Instructions Manual

How to change the system format

Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 81)
enables the user to make the following changes depending on S Video / Video input or the currently selected input
module.
The name of the selected system such as RGB, YP
disappears automatically.
S video / Video terminal input signal
For the setting
of AUTO1
For the setting
of AUTO2
"AUTO 1": Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.
"AUTO 2": Selection is automatically made out of NTSC, PAL-M and PAL-N.
Input module
ET-MD77SD1
ET-MD77SD3
AUTO
576i
When the STD (standard) button is pressed while changing the system mode (with the SYSTEM
SELECTOR), the projector automatically returns to AUTO1, AUTO2, or AUTO.
RGB1/RGB2 terminal input signals
For 720p, 1 080i input: RGB
For 480i, 576i, 480p, 576p input: RGB
For the signals other than those above, SYSTEM SELECTOR button is invalid.
P and AUTO is displayed on the top left of the screen and
B R
: AUTO1 NTSC
PAL60
: AUTO2 NTSC
PAL-N
: AUTO 480i
:
1 080/60i 1 035/60i
480i 720/50p
YP P
B R
YCbCr
PAL SECAM
NTSC4.43
PAL-M
576i
720/60p 1 080/24p
1 080/24sF 1 080/25p
1 080/50i
1 080/30p
63