Revert To Factory Settings - Contour Design ShuttlePROv2 User Manual

Shuttle multimedia controllers control panel
Table of Contents

Advertisement

3.     You  can  choose  between:  
All  (identified  by  the  icon  
ƒƒ
be  used  by  all  devices.  
Primary  (identified  by  the  icon  
ƒƒ
Secondary  (identified  by  the  icon  
ƒƒ
None  (inactive)  (identified  by  the  icon  
ƒƒ
The     i con   on   the   left   side   of   the   application   in   the   Target   Application   Menu   will   change  
according  to  the  choice  you  performed.  
4.     Click  Apply  to  validate  the  change.  
5.5        Revert  to  Factory  Settings  
When  you   modify  a   factory  setting,  this   setting  is   tagged  as   Customized.  You  can   restore  the  
factory  setting  through  this  option:  
1.     Click   on   the   Target  Application  Menu   and   select  the   application  setting  that   you   would  like  
to   restore.   You   should   now   see   this   setting   name   highlighted   in   the   Target   Application  
Menu.  
2.     Click  on  the  Options  button  in  the  Settings  Management  section.  Select  Revert  to  factory  
settings  from  the  pull-­down  menu.  
3.     The   setting  is   reverted  to   the   original  factory  settings  and   tagged  as   Factory  Settings  as   it  
was  at  installation.  
4.     Click  Apply  to  validate  the  change.  
Note:  This  operation  also  reverts  to  the  original  target  application  (in  case  you  retargeted  
the  setting  to  a  different  executable.)  
5.6        Remove  Settings  
You  may  want  to  remove  (delete)  an  application  setting  from  the  target  application  list.  
1.     Click   on   the   Target   Application   Menu   and   select   the   application   setting   you   would   like   to  
remove.   (After   so   doing,   you   should   now   see   this   setting   name   in   the   Target   Application  
Menu).  
2.     Click   on   the   Options   button   in   the   Settings   Management   section   and   select   Remove  
settings.  
3.     A   dialog  box   will   prompt  you:   "Are   you   sure  to   remove  the   selected  settings?".  Click   Yes.  
The  application  setting  is  now  removed  from  the  Target  Application  Menu.  
4.     Click   Apply   to   validate   the   change.   (Once   you   have   clicked   Apply,   the   operation   can't   be  
undone.)  
Note:  you  can  import  the  same  setting  again  later  as  we  maintain  a  list  of  settings  available  
for  download  on  our  website.  This  is  sometimes  useful  as  well  when  Contour  releases  a  new  
version  of  settings  for  a  particular  application  that  we  have  found  a  better  solution  for.
Contour  Shuttle  Multimedia  Controllers  
):  if  you  have  more  than  one  Shuttle  device,  the  setting  will  
):  only  the  primary  device  will  use  this  setting.  
):  only  the  secondary  device  will  use  this  setting.  
):  this  option  essentially  disables  the  setting.  
20  

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ShuttlePROv2 and is the answer not in the manual?

This manual is also suitable for:

ShuttlexpressShuttlepro

Table of Contents

Save PDF