Contour Design ShuttlePROv2 User Manual page 16

3.5 Programming Global Settings
Global Settings is a setting that works in all the applications that do not have specific settings
listed in the Target Application Menu. Stated differently, if you have settings defined for a
particular application, Global settings will not be activated for that application, since it is meant
for general purposes only.
Global Settings can't be targeted to the primary or secondary device: it's always targeted to
both devices.
When you open the Control Panel, Global Settings is always selected in the Target Application
Menu. By default, all the Shuttle components in Global Settings are set to Do Nothing.
However, Global Settings can be used to close applications and/or for scrolling purposes. For
example, associate:
Alt+F4 (close the current window) to a button,
•
the mouse wheel movement to the jog directions and
•
the left and right arrows to the Shuttle ring positions by varying the frequency.
•
Global Settings can be modified the same way you would when you modify any other setting,
by following the steps of paragraphs 3.4 and 3.3.
In Appendix 1, you will find a step-­by-­step example on how to program Global Settings on the
ShuttlePRO, performing the above associations.
Contour Shuttle Multimedia Controllers 15