Contour Design ShuttlePROv2 User Manual page 12

2.3.2.2.7 Switch settings
three (3) different settings for a specific program and that Button 1 is defined as "Switch to the
Next Setting" for all the three settings. When the program is first loaded, the first setting is the
default. When you press Button 1, you will switch to the second setting. And when you press it
again, you will switch to the third setting. Press Button 1 again to go back to the first setting.
2.3.2.2.8 Macro (ShuttlePRO v2 only)
2.3.2.3 Comment Field
Contour Shuttle Multimedia Controllers
This action allows you to perform a s a toggle in cases w here
an application has more than one application setting
defined for it.
This action is an alternate method of switching settings,
which can be faster than using the Shuttle device Helper
in the task bar (please refer to paragraph 4.1 for more
information about this method).
In order for this option to work efficiently, all settings for a
program SHOULD have this option enabled, preferably all
on the same button.
Let's explain this through an example: suppose you have
This action allows you to associate to a Shuttle component
one of the existing macros by choosing it from the pull-­
down menu, or to create your own new macro. To learn
more about how create new macros, refer to paragraph 6
(Programming macros with Key Composer™ (ShuttlePRO
v2)).
The Comment Field allows you to write a comment
about a command. Click the field and type in a
description.
11