Predator 2000 Owner's Manual & Safety Instructions page 15

Table of Contents

Advertisement

Air Filter Element Maintenance
1. Remove the Access Panel on the
right side of the Generator.
ITEM 62523
For technical questions, please call 1-888-866-5797.
2. Remove the Air Filter Cover and the
air filter elements and check for dirt.
Clean as described below.
Air Filter
Cover
3. Cleaning:
• For "paper" filter elements:
To prevent injury from dust and debris,
wear ANSI-approved safety goggles,
NIOSH-approved dust mask/respirator, and
heavy-duty work gloves. In a well-ventilated
area away from bystanders, use pressurized
air to blow dust out of the air filter.
• For foam filter elements:
Wash the element in warm water and
mild detergent several times. Rinse.
Squeeze out excess water and allow it to dry
completely. Soak the filter in lightweight oil
briefly, then squeeze out the excess oil.
4. Install the cleaned filter.
5. Secure the Air Filter Cover and replace the
Access Panel before use.
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

62523

Table of Contents