Remove The C1-Board; Remove The C2-Board; Remove The Attachment Metal Bottom; Remove The Attachment Metal Top - Panasonic TX-P42UT30Y Service Manual

8.13. Remove the C1-Board

1. Remove the Radiator plate. (See section 8.12.)
2. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6 and CB7).
3. Disconnect the flexible cables (C10 and C11).
4. Remove the screws (×4

8.14. Remove the C2-Board

1. Remove the Radiator plate. (See section 8.12.)
2. Disconnect the flexible cables (CB8, CB9, CB10, CB11,
CB12, CB13, CB14 and CB15).
3. Disconnect the flexible cables (C20, C21 and C23).
4. Disconnect the connector (C25).
5. Remove the screws (×4
8.15. Remove the Attachment metal
bottom
1. Remove the Radiator plate. (See section 8.12.)
2. Remove the screws (×1
ment metal bottom (L, R).
) and remove the C1-Board.
) and remove the C2-Board.
each) and remove the Attach-
8.16. Remove the Attachment metal
top
1. Remove the Cabinet assy. (See section 8.11.)
2. Remove the screws (×2
Attachment metal top (L, R).

8.17. Remove the Glass holders

1. Remove the Cabinet assy. (See section 8.11.)
2. Remove the screws (×5
3. Remove the Glass holder top.
4. Remove the screws (×5
5. Remove the Glass holder bottom.
6. Remove the screws (×4
7. Remove the Glass holder side (L, R).
25
, ×2
) and remove the
).
).
).