Initial Set Up - Hitachi L46VF04ULD Instruction Manual

Getting Started

Initial set up

When turned on for the fi rst time, the "language selection"
menu appears. The message "Welcome please select
your language!" is displayed in all language options
listed alphabetically as shown below.
Press the " " or " " button to highlight the required
language, press OK button to select. "First Time
Installation" appears. Use"
and press "
required country,
Search Type. Available search types are Digital
and analog, digital only and analog only. Set the
desired type by using "
set, press " " to select Teletext Language. Use
" or " " to select the desired Teletext Language.
Afterwards, select "Scan Encrypted" using "
" " button. Set "Scan Encrypted" using "
" " button (fi g.4).
Press OK button on the remote control to continue and
the following message will be displayed on the screen
as shown below.
To start "Automatic channel scan" select Yes
(to cancel select No), highlight the item required using
the " " or " " button and press OK button to select.
The IDTV will automatically tune to the UHF or VHF
transmission channels, searching for digital terrestrial
and analogue (if available) TV broadcasts.
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
" or " " button to set the
" button to select
" or " " button. When
" or
" or
IMPORTANT: Do not turn off the TV while
"First Time Installation" is in operation.
End of the search process, "Choose Region" osd will be
displayed on the screen (if any multiple region variants
are detected).Please select country and region choice
then press OK to continue.
After all the available stations are stored, Channel List will
be displayed on the screen. If LCN (*) is available in your
country, a message appears on the screen which asks
you if you want to sort the channels according to LCN.
In some countries, the order of the channels is arranged
automatically by the broadcaster. This is called logical
channel number (LCN). If the selected country has
LCN support, the channels will be enumerated one
by one, beginning from number 1. You cannot move
any programme to a position after the last saved one.
If you try to do this, both programmes will change their
places. If LCN support is not available, you can move
the channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel sequence.
13