ENSURE THAT THESE INSTRUCTIONS ARE LEFT FOR THE USER AFTER COMPLETION OF THE BENCHMARK SECTION Friendly Format User instructions Please read the Important Notice within this guide regarding your boiler warranty 199838...
For the first year all of our appliances are protected by our manufacturer’s guarantee which covers both parts and labour. As you would expect from Sime Ltd, it is our aim to provide our valued customers with the best in after sales and service.
The Benchmark Scheme Sime Ltd is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimi- se safety, efficiency and performance.
INTRODUCTION mode (if set on winter position) otherwise the burner will be extinguished pending the next demand for hot water. The Sime “FRIENDLY FORMAT” family is a fully automatic, wall mounted, room sealed, fan assisted range of combina- tion boilers.
the burner will light to serve the heating load. 1.6.2 Pressure gauge Set the required temperature for the C.H. and D.H.W. by rotating the potentiometers (D - E) clockwise to increase The gauge (A fig. 1) on the facia panel indicates the approxi- or anticlockwise to decrease the temperature.
Page 8
anced flue unit. The flue terminal MUST NOT BE OBSTRUCT- TURN OFF THE GAS SUPPLY TO THE APPLIANCE AT THE ED under any circumstances. If damaged, turn off the appli- GAS SERVICE COCK. ance and consult the installer, service engineer, or gas suppli- DO NOT OPERATE ANY ELECTRICAL SWITCHES.
Need help?
Do you have a question about the FRIENDLY FORMAT and is the answer not in the manual?
Questions and answers