Toyota 2014 Camry Manual page 427

■
Reset the maintenance data (U.S.A. only)
After the required maintenance is performed according to the maintenance
schedule, please reset the maintenance data.
To reset the data, follow the procedures described below:
STEP 1
Turn the engine switch (vehicles without a smart key system) or the
"ENGINE START STOP" switch (vehicles with a smart key system)
off with the trip meter A reading shown. (P. 176)
STEP 2
While pressing the display change button (P. 172), turn the
engine switch to the "ON" position (vehicles without a smart key
system) or "ENGINE START STOP" switch to IGNITION ON mode
(vehicles with a smart key system)
STEP 3
Continue to press and hold the button until the trip meter displays
"000000".
■
Allow inspection and repairs to be performed by a Toyota dealer
●
Toyota technicians are well-trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
●
Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it.
4-2. Maintenance
427
4