3-2. Using the audio system
Auto connection
To turn auto connection mode on, set "Bluetooth* Power" to on.
(P. 314)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
connection can be established.
Vehicles with a smart key system
When the "ENGINE START STOP" switch is turned to ACCESSORY or
IGNITION ON mode, the system will search for a nearby cellular phone
you have registered.
Vehicles without a smart key system
When the engine switch is turned to "ACC" or "ON" mode, the system will
search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or "Bluetooth* Power" is turned off,
you must connect the Bluetooth
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
STEP
1
Follow the steps in "Connecting a Bluetooth
"STEP 1". (P. 309)
Connecting a Bluetooth
Registering an additional device
STEP
1
Select "Select Device" on the Bluetooth
screen.
For more information: P. 306
STEP
2
310
®
device manually.
®
audio player
®
phone in a place where a
®
device" from
®
audio control