Toyota 2008 Camry Owner's Manual page 72

1-2. Opening, closing and locking the doors and trunk
Setting and canceling the functions
n
To switch between set and canceled, follow the procedure below:
STEP 1
Vehicles with smart key system:
Close all the doors and switch the "ENGINE START STOP"
switch to IGNITION ON mode. (Perform the step 2 within 10
seconds.)
Vehicles without smart key system:
Close all the doors and switch the engine switch to "ON" posi-
tion. (Perform step 2 within 10 seconds.)
STEP 2
Function
Shift position linked door lock-
ing function*
Shift position linked door
unlocking function*
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
*
: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
44
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch ( or
imately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding
desired function to be set or can-
celed are shown as follows.
Shift lever
Switch position
position
P
N
) for approx-
to the