Toyota 2008 Camry Owner's Manual page 316

STEP 5
Test the operation of HomeLink
grammed button. Check to see if the gate/device operates
correctly.
STEP 6
Repeat the steps above to program another device for each of
the remaining HomeLink
Programming other devices
n
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
Reprogramming a button
n
The individual HomeLink
reprogrammed. To reprogram a button, follow the "Programming"
instructions.
Operating HomeLink
Press the appropriate HomeLink
light on the HomeLink
®
HomeLink continues to send a signal for up to 20 seconds as long as the
button is pressed.
Erasing the entire HomeLink
®
buttons.
®
buttons cannot be erased but can be
®
®
button. The HomeLink
®
transceiver should turn on.
®
memory (all three programs)
Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator light flashes.
3-6. Other interior features
®
by pressing the newly pro-
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink memory.
3
®
indicator
291