Toyota 2008 Camry Owner's Manual page 347

Engine oil consumption
n
The amount of engine oil consumed depends on the oil viscosity, the
l
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
l
frequent acceleration and deceleration.
l A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil
l
may have become diluted, making it difficult to judge the true level accu-
rately.
Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per
l
1000 km)
If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles
l
(1000 km), contact your Toyota dealer.
Changing the engine oil (U.S.A. only)
n
To reset the oil change system, follow the procedure below:
1. Turn the "ENGINE START STOP" switch or engine switch OFF with the
trip meter A reading shown. (→P. 149)
2. While pressing the trip meter reset button (→P. 141), turn the "ENGINE
START STOP" switch or engine switch ON.
Without multi-information display
3. Continue to press and hold the knob until the trip meter displays 000000.
With multi-information display
3. Continue to press and hold the knob until "COMPLETE" appears on the
multi-information display.
4-3. Do-it-yourself maintenance
4
323