Toyota 2008 Camry Owner's Manual page 428

Installing the tire
STEP 1
STEP 2
Install the tire and loosely tighten each wheel nut by hand by
approximately the same amount.
Replacing a steel wheel with a steel wheel
Replacing an aluminum wheel with a steel wheel
Tapered portion
Disc wheel
sheet
Tapered portion
Disc wheel
sheet
5-2. Steps to take in an emergency
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is
in motion, and the tire may
come off the vehicle.
Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel sheet.
Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel sheet.
5
405