Honda 1996 Prelude Owner's Manual page 186

15. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
108 N . m (11 kgf . m , 80 Ibf . ft)
WING BOLT
16. Remove the wheel cover or center
cap.
Place the flat tire face down in the
trunk well.
17. Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
18. Secure the flat tire by screwing
the wing bolt back into its hole.
Changing a Flat Tire
19. Store the jack in its holder with
the end bracket facing to the rear.
SPACER
Turn the jack's end bracket to lock
CONE
it in place. Replace the cover.
Store the tool kit.
20. Store the wheel cover or center
cap in the trunk. Make sure it does
not get scratched or damaged.
Taking Care of the Unexpected