Honda 1996 Prelude Owner's Manual page 171

Lights
2. Remove the two screws and
remove the ceiling light assembly.
3. Turn over the ceiling light
assembly. Remove the two screws
from the spotlight bulb holder.
Maintenance
SPOTLIGHT BULB
4. Pull the bulb straight out of the
holder. Push the new bulb straight
into the holder until it bottoms.
5. Test the lights to make sure the
new bulb is working.
6. Reinstall the bulb holder and
ceiling light assembly in the
reverse order of removal. Snap the
ceiling light lens back in place.
Replacing the Trunk Light Bulb
1. Remove the lens by carefully
prying on the edge of the lens with
a fingernail file or a small flat-tip
screwdriver. Do not pry on the
edge of the housing around the
lens.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.