3-2. Using the multimedia system
■
Release Tones
●
A continuous tone signal is a character string that consists of numbers
and the characters "p" or "w". (e.g.056133w0123p#1)
●
When the "p" pause tone is used, the tone data up until the next pause
tone will be automatically sent after 2 seconds have elapsed. When the
"w" pause tone is used, the tone data up until the next pause tone will be
automatically sent after a user operation is performed.
●
Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired.
A phone number with continuous tone signals can be registered in the
contact list.
●
Tone data after a "w" pause tone can be operated on voice command
during a call.
■
To transfer a call
Select "Handset Mode" to change from a hands-free call to a cellu-
lar phone call.
Select "Handset Mode" to off from a cellular phone call to a hands-
free call.
■
Transmit volume setting
Select "Transmit Volume".
Select the desired level for the transmit volume.
Select "OK".
■
To hang up
Press the
322
switch on the steering wheel or select
.