Table of Contents
Advertisement
Audio System
SCAN — The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. When the system is
in the SCAN mode, SCAN shows in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Preset — You can store the
frequencies of your favorite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
Comfort and Convenience Features
PWR/VOL KNOB
SCAN INDICATOR
AM/FM BUTTON
PRESET BUTTONS
TUNE BAR
SEEK BAR
STEREO INDICATOR
SCAN BUTTON
Advertisement
Table of Contents
