Table of Contents
Advertisement
Lights
Replacing Rear Bulbs
1. Open the trunk.
2. Remove the fasteners from the
trunk lining. To remove a fastener,
push on the center of the head
until it pops in. Then pull it out.
3. Pull the lining back.
Maintenance
4. Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal, or side
marker.
5. Remove the socket by turning it
one-quarter turn counterclockwise.
6. Remove the burned out bulb. To
remove the stop/taillight, back-up
or side marker light bulb, pull the
bulb straight out of its socket. To
remove the turn signal light bulb,
push it in and turn it
counterclockwise until it unlocks.
Advertisement
Table of Contents
