Table of Contents
Advertisement
Controls Near the Steering Wheel
Daytime Running Lights
Canadian models only
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Instruments and Controls
Instrument Panel Brightness
BUTTON
BUTTON
The buttons in the lower left corner
of the instrument panel adjust the
brightness of the display in five steps.
Push the + or — button five times
to see the full range.
The display dims when the parking
lights or headlights are turned on.
Adjust the brightness to the desired
level with the headlight switch off,
and also with the headlight switch on.
Both settings will remain at those
levels until you change them.
With the headlight switch on, you
can switch the display to full daytime
brightness by pushing and holding
the + button. Push the — button to
return the display to the original
brightness.
Advertisement
Table of Contents
