1. Bolt
3. Disconnect the headlight coupler,
and then remove the bulb cover.
1. Headlight bulb cover
2. Headlight coupler
4. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
1. Headlight bulb holder
2. Headlight bulb
5. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the headlight unit by install-
ing the bolts.
8. Place the turn signal light bracket
cover in the original position, and
then install the bolts.
7-29
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
7