Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
XVS1100A
1. Screw
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24283
XVS1100AA
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
Replacing the auxiliary light
bulb (XVS1100AA)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
1. Screw
2. Remove the socket (together with
[ECA10681]
7-33
moving the screws.
the bulb) by pushing it in and turn-
ing it counterclockwise.
EAU33413
7