Handlebar Switches - Yamaha 2011 XVS1300AA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
2. If the engine starts, turn it off and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
NOTICE
4
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
1
1. Speedometer panel
2. Brightness level display
This function allows you to adjust the
brightness of the speedometer panel to
suit the outside lighting conditions.
To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "
"SELECT" switch.
3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
ECA11590
five seconds or more.
4. Push the "
"SELECT" switch to select the de-
sired brightness level.
5. Push the "RESET" switch to con-
firm the selected brightness level.
The display will return to the odom-
eter, tripmeter or clock mode.
2

Handlebar switches

Left
" side of the
" or " " side of the
1. Pass switch "
2. Dimmer switch "
3. Turn signal switch "
4. Horn switch "
4-9
EAU12348
"
/ "
/ "
"