Replacing Light Bulbs - Toyota 1997 Celica Owner's Manual

Vertical movement gauges: The bubble
on the gauge should be within two marks
from center on both sides.
Horizontal movement gauges:
triangle mark on the gauge should be
within one mark from the "O" position.
If a gauge reading is not within the accept-
able range, have the aiming adjusted by
your Toyota dealer.

Replacing light bulbs—

The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
!
Halogen bulbs have pressurized
gas inside and require special
handling. They can burst or shatter
if scratched or dropped. Hold a bulb
only by its plastic or metal case. Do
not touch the glass part of a bulb
with bare hands.
The
NOTICE
Only use a bulb of the listed type.
Light bulbs
Headlights
(low beam)
Headlights
(high beam)
Front fog light
Parking and front turn sig-
nal lights
Front side marker lights
CAUTION
Bulb W Type
No.
9006 55 A
9005 65 B
- 55 C
1157 27/8 C
194 3.8 D
193